GreenDrill 5.2 on-board computer
GreenDrill BAH0054-4 02.13
59
7.8.3
Wheel sensor
Set whether the tractor's speed sensor is being used:
YES, NO or AUTO
To automatically detect whether or not the speed sensor of the
tractor is being used, set the on-board computer to AUTO.
Make settings with the
buttons.
7.8.4
ISO 11786 Signal
The on-board computer requires 3 signals
Travel speed [km/h]
The machine is in working position
The machine is in transport position.
Which of the three tractor signals is being used?
Lifting gear signal
Actual current speed (from radar, wheel sensor or inductive sensor).
Theoretical speed (from the gearbox)
Actual speed (from radar, wheel sensor or inductive sensor).
The on-board computer
receives an actual speed sensor
is connected to the 7-pin tractor signal socket:
YES, NO or AUTO
Make settings with the
buttons.
Theoretical speed (from the gearbox)
The on-board computer receives a theoretical speed signal
YES, NO or AUTO
Make settings with the
buttons.
Summary of Contents for GreenDrill 200-E
Page 2: ...2 GreenDrill BAH0054 4 02 13...
Page 69: ......
