General Safety Instructions
12
GreenDrill BAH0054-4 02.13
1.10
Structural changes
You may make no changes, expansions or modifications to the machine without the authorisation of
AMAZONEN-WERKE. This is also valid when welding support parts.
Any expansion or modification work shall require the written approval of AMAZONEN-WERKE. Only
use the conversion and accessory parts approved by AMAZONEN-WERKE so that the operating
permit, for example, remains valid in accordance with national and international regulations.
Vehicles with an official operating permit, or equipment connected to a vehicle with a valid operating
permit or approval for road transport according to the German road traffic regulations, must be in the
state specified by the permit or approval.
WARNING
Risk of being crushed, cut, caught, drawn in or struck if support-
ing parts break.
It is forbidden to:
Drill holes in the frame or on the running gear.
Increase the size of existing holes on the frame or the running gear.
Weld support parts.
1.10.1
Spare and wear parts and auxiliary materials
Immediately replace any machine parts which are not in a perfect state.
Use only genuine AMAZONE spare and wear parts or parts approved by AMAZONEN-WERKE to
ensure that the operating permit remains valid according to national and international regulations. If
you use spare and wear parts from third parties, there is no guarantee that they have been designed
and manufactured to meet the load and safety requirements.
AMAZONEN-WERKE accepts no liability for damage arising from the use of unapproved spare parts,
wear parts or auxiliary materials.
1.11
Cleaning and disposal
Handle and dispose of any materials used carefully, in particular:
When carrying out work on lubrication systems and equipment and
When cleaning using solvents.
1.12
Operator workstation
The machine may be operated by only one person sitting in the driver's seat of the tractor.
Summary of Contents for GreenDrill 200-E
Page 2: ...2 GreenDrill BAH0054 4 02 13...
Page 69: ......
