AMAZONEN-Werke
H. Dreyer GmbH & Co. KG
e-mail:
http://www.amazone.de
Calibrating,
without starting a new job
Folding implement in and out
Press key
T1
to select „
Menu“
.
Press key
and
. [Fig. 1] appears.
With the stopped machine press key
T1
to select
“Choice”
Press key
until [Fig. 7] appears.
Job
Menu
T1
Menu
T1
Seed rate
K/m2
T2
Folding
Folding in
T2
Desired value:
T3
Folding out
T3
150,0 kg/ha
Proceed
T4
Proceed
T4
Fig. 1
Fig. 7
Enter desired value, e.g.:
150,0 kg/ha
. Press key
Press keys
and
.
Implement
Menu
T1
Gearbox-
T2
Press key
until machine is entirely lifted.
Press key
= fold down implement or
Press key
= fold in implement.
position:
Calibr.
T3
50
Proceed
T4
Setting the seed placement depth
Fig. 2
Enter any wanted gearbox setting value, e.g.:
50
.
Press key
and
.
Implement
Menu
T1
Calibration
T2
1/40 ha
Calibr.
T3
34,120
Proceed
T4
Fig. 3
Fig. 8
Press key
to calibrate
Calibration
return
T1
T2
T3
calibrate 1/40 ha, weigh,
Enter weight (kg),
Press “Enter”
T4
Fig. 4
For grain calibrate at least until the signal sounds
(1/40ha). For fine seeds (e.g. rape) calibrate until in line 2
the value 0,1ha (1/10ha) is shown.
Calibration
T1
0,0250 ha
T2
12,365 kg
T3
Lift packer coulters by pressing key
and reset depth
limiting pin (Fig. 8/2) in the setting segment.
The deeper the depth setting pins are set and the higher
the figures on the contact space towards the stops (Fig.
8/1) are the deeper the placement depth of the seed will
get.
Never forget to secure the depth setting pins with clip
pins.
After setting, briefly start the implement and press key
until the stop rests on the depth setting pin.
13,0 kg
proceed
T4
Fig. 5
Weigh collected seed (e.g.
13,0 kg
) and enter.
Press key
and
.
Implement
Menu
T1
Calibration
T2
1/40 ha
Calibr.
T3
0 kg
Proceed
T4
Fig. 6
The gearbox setting lever moves to the calculated scale
position. Recheck by pressing key
and repeat the
calibration test from Fig. 3 until the displayed seed rate,
e.g. 12,365 kg (see Fig. 5, line 3) coincides with the
weighed seed rate.
After coincidence press key
and
