Remove the bolts on the tine.
Insert the new tine.
Install the bolts on the tine.
410 Nm
CMS-I-00003072
10.1.8 Replacing C-Mix-3 coulters
INTERVAL
as required
WARNING
Risk of crushing due to lowering of the
implement
Raise the implement only slightly.
CAUTION
Risk of injury from sharp edges on the
coulters and the bolt heads
Wear gloves.
Pay attention to sharp edges.
Do not allow carriage bolts to rotate.
1.
Remove the bolts.
2.
Replace the coulters.
3.
Install the bolts.
4.
Tighten the bolts.
5.
Retighten the bolts after 5 operating hours.
145 Nm
CMS-I-00003077
CMS-T-00004184-C.1
10 | Repairing the implement
Maintaining the implement
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
82
