6.3.5 Raising the running gear into working position
6.3.5.1 Raising the running gear into working position with the roller
Raise the running gear into working position
using the "yellow 1" tractor control unit, until the
the cylinder tube
1
is resting on the stop plate
2
on the hydraulic cylinders.
1
2
CMS-I-00004824
6.3.5.2 Raising the running gear into working position without the roller
Raise the running gear into working position
using the "yellow 1" tractor control unit, until the
cylinder tube
1
is resting on the lowest of the
swivelled-in spacer elements
2
on the hydraulic
cylinders.
1
2
CMS-I-00004831
6.3.6 Adjusting the working depth of the discs
Selection of the working depth of the discs depends
on different factors, e.g.:
Soil type: light to heavy, dry to wet
Forward speed
CMS-T-00006818-B.1
CMS-T-00006820-B.1
CMS-T-00006821-B.1
CMS-T-00006888-B.1
6 | Preparing the machine
Preparing the implement for operation
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
57
