Eliminating faults
8
Errors
Cause
Solution
The working depth is uneven
across the entire implement width
The disc gangs are not properly
aligned
Align the disc gangs relative to
each other.
The coulters are worn
Replace worn coulters.
Running gear is not in the correct
working position
Raise the running gear into
working position.
The disc gangs or tine rows are
clogged with plant residues
Too much plant residues on the
field
Raise the implement regularly.
Remove plant residues from
the implement.
Lower the implement.
The working depth of the tines,
discs or levelling unit is too deep
Reduce the working depth.
Insufficient throughput between the
discs
Increase the throughput
between the discs.
The work pattern behind the roller
is uneven
The levelling unit is not correctly
set
Correct the working depth of
the levelling unit.
Adjust the edge levelling discs.
Move the edge levelling discs.
Soil piles up in front of the roller
The roller is working too deep
Reduce the working depth of
the discs and tines.
Too much load on the roller
CMS-T-00006925-A.1
8 | Eliminating faults
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
70
