Amazone Cenio 3000, Original Operating Manual

Page: 4 / 84

6.3.2 Adjusting the working depth of the
levelling
48
6.3.3 Preparing the spring steel closer for
operation
50
6.3.4 Preparing the edge levelling discs
for operation
50
6.3.5 Adjusting the scraper to the roller 51
6.3.6 Removing the road safety bars 52
6.3.7 Adjusting the trailing elements 52
6.4 Preparing the machine for road
travel
54
6.4.1 Preparing the side elements for
road travel
54
6.4.2 Putting on the road safety bars 54
6.4.3 Reducing the implement width to
the permitted transport width
54
6.5 Calculating the permissible
payload
55
7 Using the machine 56
7.1 Using the implement 56
7.2 Turning on the headlands 56
8 Eliminating faults 57
9 Parking the machine 59
9.1 Uncoupling the 3-point mounting
frame
59
9.2 Driving the tractor away from the
implement
60
9.3 Uncoupling the power supply 60
9.4 Disconnecting the hydraulic
hose lines
61
10 Repairing the implement 62
10.1 Maintaining the implement 62
10.1.1 Maintenance schedule 62
10.1.2 Replacing tines with compression
spring overload safety
63
10.1.3 Replacing tines with shear bolt
overload safety
63
10.1.4 Replacing C-Mix-3 coulters 64
10.1.5 Replacing the C-Mix-3 Clip coulter 65
10.1.6 Replacing the discs 65
10.1.7 Checking the levelling connection 66
10.1.8 Checking the rollers 67
10.1.9 Checking the top link pin and lower
link pin
67
10.1.10 Checking the hydraulic hose lines 67
10.2 Lubricating the implement 69
10.2.1 Overview of lubrication points 70
10.3 Cleaning the implement 71
11 Loading the implement 72
11.1 Loading the implement with a
crane
72
12 Appendix 73
12.1 Bolt tightening torques 73
12.2 Other applicable documents 74
13 Directories 75
13.1 Glossary 75
13.2 Index 76
TABLE OF CONTENTS
MG6806-EN-GB | Q.1 | 26.07.2022 | © AMAZONE II