10.1.2 Replacing tines with compression spring overload safety
INTERVAL
as required
WARNING
Risk of crushing due to lowering of the
implement
Raise the implement only slightly.
Remove the bolts on the tine.
Insert the new tine.
Install the bolts on the tine.
410 Nm
CMS-I-00003072
10.1.3 Replacing tines with shear bolt overload safety
INTERVAL
as required
WARNING
Risk of crushing due to lowering of the
implement
Raise the implement only slightly.
CMS-T-00004187-B.1
CMS-T-00004183-B.1
10 | Repairing the implement
Maintaining the implement
MG6806-EN-GB | Q.1 | 26.07.2022 | © AMAZONE
63
Summary of Contents for Cenio 3000
Page 83: ......
