2.
Release the linch pins and locking pins
4
.
3.
Release the linch pin
3
.
4.
Hold the wheel mark eradicator
1
.
5.
Remove the locking pin
2
.
6.
Remove the wheel mark eradicator.
1
3
4
2
CMS-I-00003339
7.
Loosen and remove the nuts for the clamp
connection
2
.
8.
Remove the wheel mark eradicator bracket
1
.
2
1
CMS-I-00003337
9.
Install the wheel mark eradicator bracket
1
rotated by 180 degrees.
10. Install the nuts for the clamp connection
2
.
11. After 5 hours of operation, check the bolt
connection for tight fit.
2
1
CMS-I-00003338
8 | Eliminating faults
MG6158-EN-II | H.1 | 30.04.2021
57
