6.3.2 Adjusting the working depth
6.3.2.1 Manually adjusting the working depth of the discs
1.
Slightly raise the implement.
2.
Insert the hand lever
1
.
3.
Secure the hand lever with a linch pin.
4.
Remove the linch pin
3
.
5.
Engage the swivelling lever
5
according to the
desired direction of rotation.
6.
Remove the linch pin
6
.
7.
Swivel down the safety clip
7
.
Adjustment spindle
Working depth
shorten
increase
lengthen
reduce
8.
Set the adjustment spindle to the desired length
using the hand lever.
9.
Set the locking pin
2
vertically.
10. Swivel up the safety clip.
11. Secure the safety clip with a linch pin.
12. Set the swivelling lever horizontally.
13. Secure the swivelling lever with a linch pin.
14. Measure the distance between the middle of pin
4
and the middle of pin
8
.
15. Set the adjustment spindle on the second disc
array to the same length.
16. Put the hand lever in parking position.
17. Secure the hand lever with a linch pin.
1
3
5
4
6
7
8
2
CMS-I-00000886
CMS-T-00000998-E.1
CMS-T-00004404-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
41
