NOTE
Permitted distances
A
between the roller
element and scraper:
Wedge ring roller: 12 mm ± 2 mm
Wedge ring roller with matrix tyre profile: 13
mm ± 2 mm
Tooth packer roller: at least 1 mm
A
CMS-I-00002071
1.
Loosen the bolt
1
on the scraper
2
.
2.
Move the scraper in the elongated slot.
3.
Tighten the bolt
1
.
4.
Check the distances when the implement is
lowered.
CMS-I-00000521
6.3.6 Removing the road safety bars
1.
Remove the road safety bars from the rear
harrow.
2.
Turn the traffic safety bars
1
by 180°, place on
top of each other on the brackets
2
.
3.
Secure the road safety bars with tensioners
3
.
CMS-I-00000518
CMS-T-00000091-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
50
