7.
Put the setting lever
1
in the holder.
8.
Secure the setting lever with a linch pin
2
.
CMS-I-00002242
7.6 Aligning the implement horizontally
7.6.1 Aligning the implement horizontally with the support wheels
The implement is guided horizontally by the support
wheels.
A spirit level is attached to the implement frame. The
spirit level shows the alignment of the implement in
the direction of travel.
1.
Drive the tractor and implement onto a level
surface.
2.
Lower the implement on the support wheels.
3.
Put the lower links or hydraulic drawbar in the
float position.
4.
Check that the implement is aligned horizontally
using a spirit level.
5.
If the implement is not standing horizontally,
check the setting of the support wheels, see
page 71.
7.6.2 Aligning the implement horizontally with lower link hitch
A spirit level is attached to the implement frame. The
spirit level shows the alignment of the implement in
the direction of travel.
CMS-T-00004955-C.1
CMS-T-00004956-C.1
CMS-T-00004957-B.1
7 | Using the machine
Aligning the implement horizontally
MG6828-EN-II | N.1 | 13.08.2021
66
