6.5.5 Aligning the implement horizontally
6.5.5.1 Aligning the implement horizontally with lower link hitch
A spirit level is attached to the implement frame. The
spirit level shows the alignment of the implement in
the direction of travel.
1.
Drive the tractor and implement onto a level
surface.
2.
Align the implement horizontally using the lower
link.
6.5.5.2 Aligning the implement horizontally with hydraulic drawbar
A spirit level is attached to the implement frame. The
spirit level shows the alignment of the implement in
the direction of travel.
1.
Drive the tractor and implement onto a level
surface.
2.
Open the stop tap on the hydraulic drawbar.
3.
Align the implement horizontally using the
hydraulic drawbar.
The horizontal alignment of the hydraulic drawbar is
secured with spacer elements.
4.
Remove the linch pin
1
.
5.
Pull out the pin
2
.
6.
Swivel down the required spacer elements
3
.
7.
Insert the pin.
8.
Secure the pin with a linch pin.
9.
Close the stop tap on the hydraulic drawbar.
1
2
3
CMS-I-00003548
6.5.6 Locking the tractor control units
Depending on the equipment, the tractor control
units are locked mechanically or electrically.
CMS-T-00004962-B.1
CMS-T-00004957-B.1
CMS-T-00004958-C.1
CMS-T-00006337-A.1
6 | Preparing the machine
Preparing the machine for road travel
MG6828-EN-II | N.1 | 13.08.2021
58
