Adjustments
Catros BAG0053.14 10.17
63
8.3
Offset of the disc rows
The offset of the disc rows is adjusted as re-
quired by means of an AMAZONE eccentric pin.
6 insertion holes are available for this purpose.
(Fig. 39).
1. Move the machine back a little.
→
The disc rows are displaced so that the
insertion holes are uncovered.
2. Secure the tractor against unintentional
starting and unintentional rolling away.
3. Release clip pins (Fig. 39/1 and Fig. 40/1).
4. Insert eccentric pins (Fig. 39/2 and Fig.
40/2) into the desired insertion hole.
5. Secure the clip pin.
Fig. 39
CAUTION
Crushing hazard between eccentric
pin and stop of disc row!
Fig. 40
•
A preferential insertion hole is
marked with an arrow (Fig. 39/3).
Catros
+
: Preferential insertion
hole one place further to right.
•
Catros -2 have one possible disc
offset setting for each boom (Fig.
40):
→
Select the same insertion holes
on left and right!
Hydraulic adjustment of the disc gang offset (optional)
The offset of the disc gangs can be adjusted
using the
beige
tractor control unit.
Fig. 41
