Amazone Catros 3001 Operating Manual Download Page 38

Page: 38 / 88

Structure and function

Catros BAG0053.14 10.17

5.2

Hydraulic system connections

•

All hydraulic hose lines are equipped with grips.

Coloured markings with a code number or code letter have been

applied to the gripping sections in order to assign the respective
hydraulic function to the pressure line of a tractor control unit!

Films are stuck on the implement for the markings that illustrate

the respective hydraulic function.

•

The tractor control unit must be used in different types of activa-
tion, depending on the hydraulic function.

Latched, for a permanent oil circulation

Tentative, activate until the action is executed

Float position, free oil flow in the control unit

Marking

Function

Tractor control unit

blue

foldable

machine

fold out

double acting

fold in

green

working depth

(Optional)

increase

double acting

decrease

beige

Offset of the disc

gangs

(option)

reducing

Double acting

enlarging

WARNING

Danger of infection from escaping hydraulic fluid at high pres-
sure!

When coupling and uncoupling the hydraulic hose lines, ensure that
the hydraulic system is depressurised on both the machine and trac-
tor sides.

If you are injured by hydraulic fluid, contact a doctor immediately.

Summary of Contents for Catros 3001

























































































Search results

Summary of Contents for Catros 3001

Reviews:

Brands by name

Popular brands

Amazone Catros 3001, Operating Manual

Search results

Summary of Contents for Catros 3001

Reviews:

Brands by name

Popular brands