Adjustments
62
Catros BAG0053.14 10.17
8.1.1
Mechanical working depth adjustment
The depth is adjusted by turning the setting spin-
dle (Fig. 36/1) using the hand lever (Fig. 36/2).
Fig. 36
Catros -2:
Set the working depth to the same
value at all adjustment units.
Adjusting spindle with ratchet
1. Remove clip pin (Fig. 37/3).
2. Engage swivel lever (Fig. 37/2) according to
desired direction of rotation.
3. Extend/shorten spindle (Fig. 37/1) by
means of the hand lever.
4. Secure setting with clip pin (Fig. 37/3).
Fig. 37
8.2
Hydraulic working depth adjustment (optional)
Actuate tractor control unit
green
.
→
The working depth is set hydraulically using
the scale(Fig. 38).1
•
Reduce working depth:
set indicator toward 2.
•
Increase working depth:
set indicator toward 12.
Fig. 38
