4
EN
• When using the OPS function, the sum pressure must not exceed the
tire’s maximum inflation pressure.
• The air inlet/outlet and the connectors must be kept clean and
unobstructed.
• This product is not suitable for the filling of bicycle tires or items with
a similar small capacity as an over filling and a burst is possible.
• Before connecting/disconnecting any compressor to the product,
release all the pressure or close the pressure vents. Never connect/
disconnect any air hose when it is under pressure.
• This product is connected directly to compressed air which might
contain oil and water. Water is from condensation and oil is from the
compressor. Water and oil can destroy this product. Always attach a
filter prior to this product’s air connection.
• To avoid product damage, never exceed the maximum inlet pressure
or 182 psi / 12.5 bar / 1250 kPa / 12.7 kg/cm
2
.
• This product is only to be used with compressed air. Do not use this
product with any other gases.
SAVE THESE INSTRUCTIONS
Intended Use
• This product is intended for an automated inflation of tires. The compressed
air is provided by a separate compressor (not included).
• This product is not intended to inflate items with a small capacity
(e.g. bicycle tires) as the air outflow of this product is too high.
This may lead to a sudden over filling and a burst of the item.
• No liability will be accepted for damages resulting from improper use
or non-compliance with these instructions.
