10
EN
• Press the
button (R) to save the setting. The buzzer (G) confirms
the setting with a longer sound. If the set OPS value is > 0, the OPS
indicator (P) lights up in the display (N).
• Connect the tire chuck (L) to the tire valve. The inflation process starts
automatically.
• If the tire pressure is below 3 psi (0.2 bar), press the
button (R) to
start the inflation process.
During inflation
• During the inflation, the progress bar (V) shows the inflation progress.
NOTICE
If you are using the OPS (over pressure system), the progress
bar (V) rises until the sum pressure is reached. Then the progress bar
decreases until the goal pressure is reached.
• If necessary, change the goal pressure by pressing the
+/–
buttons (S).
• You can cancel the inflation anytime by pressing the
button (R).
• When the inflation process is finished, the buzzer (G) sounds once.
• To remove the tire chuck (L) from the valve: Press the lever of the tire
chuck (L) and remove it.
Cleaning and Maintenance
WARNING
Risk of electric shock!
To prevent electric shock,
unplug the product before cleaning.
WARNING
Risk of electric shock!
During cleaning, do not
immerse the product in water or other liquids. Never hold the product
under running water.
Cleaning
• To clean the product, wipe with a soft, slightly moist cloth.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.
Inlet filter
• Regularly ensure that the supported air is clean, without any of oil, dirt
or moisture. Refer to the instruction manual of the compressor or the
preconnected filter.
