INSTALLING YOUR PHONE HOLDER
Installing your phone holder is required to use your ASC-2080 drone’s camera. To install your phone holder,
turn your controller around to the back side with the battery compartment facing you and start by clicking
in the top “two teeth” into the two holes on the top of the controller and then proceed to click in the
bottom (see diagram U4).
To remove, pull from the bottom first.
U4
finished
installation
a
b
9
10
RECORDING VIDEOS AND TAKING PHOTOS WITH YOUR ASC-2080 DRONE
Your ASC-2080 comes equipped with an onboard HD digital camera that takes both video and still photographs.
Your ASC-2080 has the ability to record Video and Photos in two places simultaneously! When using the
ASC-2080 App you will be able to Stream and Record both Videos and Still Photos directly to your mobile device
while at the same time recording Videos and Still Photos
in even greater definition
directly to a Micro-SD card
installed on the drone.
Note the Micro SD card is not included and will need to be purchased separately.
WHAT YOU WILL NEED TO RECORD ON A microSD CARD (this is the highest definition)
1. One microSD card reader (included).
2. One microSD card (not included).
3. A Computer with a USB port and Windows Media Player or other Media player that can play mp4 files.
FORMATTING YOUR microSD CARD
Before you can begin to take videos or digital photographs you must first format your microSD card. To format
your microSD card simply place the microSD card into the included USB SD card reader and plug it into your
computers USB port (see diagram U1 and U2 below). After a few moments an icon will appear on your Desktop.
Right click on the Icon and follow instructions to format your microSD card.
INSTALLING THE microSD CARD IN YOUR ASC-2080 DRONE
• Place the formatted microSD card into the ASC-2080 SD card port (see diagram U3 below). Push gently until
you hear and feel the microSD card “
click
” into the SD card slot.
• Turn the ASC-2080 on and make sure that it is both fully charged and properly synced to the controller (See
“HOW TO SYNC YOUR ASC-2080” on page 4 ).
TAKING DIGITAL PHOTOS
To take photographs short press the CAMERA button of the controller (refer to CONTROLLER DIAGRAM on pg. 3),
when you push the button you will hear a "beep" and the red and white led lights on the drone will
flash one
time
indicating that a picture has been. taken.
RECORDING VIDEOS
To begin recording a video,
long press
the CAMERA button for 2-3 seconds. You will hear
2 "beeps"
and the red
and white LED lights on the body will begin to rapidly flash. The flashing LEDs indicate that you have begun
recording video. To stop recording and Exit Video mode, simply depress the Camera Button once again. You will
hear 2 beeps and the LED lights on the body should stop flashing and become solid.
REMOVING YOUR microSD CARD
To remove your microSD Card push in gently on the back of the SD card with your thumb or forefinger until you
hear and feel a “clicking sound”. The microSD card will “pop-out” slightly and is ready for removal. Simply grab
and pull gently away from the ASC-2080’s camera port to remove the card. Always store your microSD card in a
clean, safe and cool environment.
DOWNLOADING AND CLEARING SPACE ON YOUR microSD CARD
Plug your microSD card into the microSD card reader and connect to your computer. It is best to always
download all your videos and pictures on to your computer and not store this data on your microSD card. After
downloading your photos and videos , follow your computers instructions to “delete” files on your microSD card.
Diagram U2
microSD card
goes in back slot
Diagram U1
microSD card facing down
Diagram U3
IMPORTANT NOTICE: It’s recommend to test your camera functions before flying.