TPD
Jul 2016
20
Amate Audio
6.3 Output Menus
To access the Input Menus press the
<Channel
or
Channel>
key. Press Exit to finish
editing or again
<Channel
or
Channel>
to edit other channels.
Please note that by default the outputs channels are linked in groups of two, as
shown in the following table:
Internal Channel
Aux Channel
Display Name
Subwoofer (SW)
Aux 1
Out SW1
Left
Aux 2
Out L2
Right
Aux 3
Out R3
Table 5.
Links between internal and auxiliary channels
The following menus are available for each output channel. The options are shown
for the output link composed of the Left output channel and Aux 2 (Out L2).
WARNING:
For the specifics prests for Amate Audio loudspeakers (11
to 30) the output menu parameters are only available with the Admin
password.
6.3.1 Gain
Adjust the gain of each output, using the rotary knob.
6.3.2 Mixer [only in Admin mode]
Select the level to be routed from each input by turning the rotary knob. Select 0dB
for maximum level of an input. To disable one input, turn the rotary knob counter-
clockwise until “Off” is displayed. Push the rotary knob to select the next input.
The default setting of the mixer is as following:
Output
Input L
Input R
Subwoofer
-6.00dB (*)
-6.00dB(*)
Left
0 dB
Off
Right
Off
0 dB
*NOTE:
This value may change depending on the selected preset
Table 6.
Default setting for internal channel routing
0.50dB
OutL2 Gain
Input L 0.00dB
OutL2 Mixer
Input R Off
OutL2 Mixer
Summary of Contents for TPD
Page 58: ......