Amate Audio NITID N18W, User Manual

Page: 8 / 25

NITID N18W_N218W Oct 2017
8
Amate Audio
F) AUTHENTICATION QR CODE: This QR code is a smart label that ensures that
the product is an original Amate Audio product. To verify the authenticity, please
follow the instructions in the following link:
http://www.amateaudio.com/en/product-authentication/
Connections:
G) AC MAINS INPUT: Mains supply connection via PowerCon. Use the blue
connector for AC input.
Always use mains power cable supplied by manufacturer.
Never connect the NITID cabinets to an unearthed mains supply or by
using an unearthed mains cable.
H) AC LINK: Grey connector to feed other units in parallel. Linking up to 2 units is
possible, provided that a quality cable of a minimum section of 3x2.5mm
2
is used.
Connecting more than 2 units in parallel may lead to a voltage drop in the cable that
will reduce the equipment performance.
I) BALANCED INPUT/LINK:
XLR-3 Female balanced signal connector for signal input and XLR-3 Male connector
for parallel connection of various cabinets with the same input signal.
Please always use balanced microphone cable with the following pin
assignment:
1. Shield 2. (+) Live 3. (-) Return
2.2. Configurations
2.2.1. Parallel connection
Connect the signal (mixing desk output) to INPUT on the first unit. Use the LINK
output to transfer the INPUT signal to the second unit and thus sequentially for
further units. All of
the units in this chain
must be switched on.
For the mains
connection use the
cable with the blue
PowerCon.
You can use
the
mains connection in
parallel by using a
cable
with grey
PowerCon at one
end and the blue
PowerCon
at the
other end.
Fig. 3. Parallel connection for N18W and N218W cabinets (signal and mains)