Amate Audio NITID N18W, User Manual

Page: 6 / 25

NITID N18W_N218W Oct 2017
6
Amate Audio
2. CONNECTIONS
2.1. Connection Panel
The power and audio connections are located on the unique panel, shown in 2. The
different parts of the panel are explained in detail in the following sections of the
manual.
Control:
A) LCD : Displays information about the system status. The main screen shows the
following information.

Current preset

Input Level

Output Level LF Channel

Output Level HF Channel

Amplifier temperature

ALC mode enabled/disabled

ECO mode enabled/disabled

Keypad locked/unlocked
B) KEYPAD : Allows the user to perform basic operations on the DSP such as Preset
selection, audio settings and user preferences. There are three keys available:
MENU key: OK key: Circular key:
To enter the menu the keypad must be unlocked by pressing simultaneously the
MENU and OK keys.
The central circle of the circular key will light up in blue when this key is active.
C) PROTECTION LED: This led lights up when the amplifier is in a protection
situation (such as temperature excess, overcurrent, or other situations that can
compromise the amplifier’s integrity). It will also light up when the amplifier is in
standby mode. This happens for a couple of seconds at start-up.
The Protection led will light off when the amplifier recovers from the abnormal
situation. Shall the Protection led keep up lighted on even after a system restart,
please contact an authorized service.
D) LIMITER ON LED: The limiter led lights up to indicate that the amplifier is
delivering the maximum power set by the limiter circuit. The limiter prevents the
loudspeaker from receiving excessive or distorted signal. Continuous lightning of this
led indicates that the signal is being massively compressed. In this case, the input
level should be reduced in order to get a proper dynamic headroom.
Model Specifications:
E) MODEL DATA: The basic data of the model is found here:
- Model reference
- Amplifier program power (Watts)
FLAT