Amate Audio NITID N12A6, User Manual

Page: 17 / 24

NITID N12A6 Jul 2022
17
Amate Audio
Delay
0.0ms
0.0m
Delay
35.3ms
12.0m

TH (Threshold): Shows the actual value of the limiter threshold (cursor).
Additionally, the bar will display the input level. The level of the threshold in
dB is also displayed next to the bar in figures.

GR (Gain Reduction): This bar shows when the limiter is active (the threshold
value is being exceeded by the input level). The gain reduction level will
display as an inverted VU bar (see Fig. 23, right).

OUT: output level after the limiter. This is the actual signal level after the
signal goes through the limiter. If the threshold is not reached, it will be the
same as the input level. If the threshold is exceeded, there will be a reduction.
The limiter acts over the Peak limiter value. The system has also an
internal RMS limiter that is fixed (see Section 4.7.1).
4.4.4. Delay Menu
In the Delay Menu, it is possible to add a Delay to the signal in the internal DSP.
Press OK to start editing the Delay value. The cursor will blink to show that the value
is being edited. Use the Circular key to modify the value, and press OK to finish
editing.
The value of the Delay is displayed in milliseconds (ms) and meters (m). The value
of the delay ranges from 0 to 40 meters (0 to 117.6ms).
The delay value is applied short after a value has been selected with the
Circular key. When the delay is applied a short fade in / fade out of the
output signal will be performed.
The centre led of the circular key will light off while this process is performed, and will
light on again when the new value has been loaded.
4.5. SETUP Menu
When the word SETUP is displayed, press OK. The ECO Mode on/off selection will
show up as in Fig. 25.
Here, use the MENU key to browse all the setup options: ECO Mode, Front Led,
Front Limiter Indication, Mute, Loudness (ALC), LCD Backlight and Keypad Lock.
Press OK to change the value for the displayed selection (switch between ON/OFF).
Fig. 24.
Delay display (left) and Delay while editing (right)