NITID N12A6
Jul 2022
20
Amate Audio
Further languages will be available in future firmware releases.
On the last screen (System), it is also possible to reset the system to the factory
values by clicking OK. In the Factory Setting Menu, press MENU to highlight the
option Restore. Then press OK to confirm.
4.7. Special DSP Features
4.7.1. RMS Limiter
NÍTID systems combine a carefully designed dual limiter system to independently
protect each transducer against power overload: a peak Limiter and a RMS Limiter.
The RMS Limiter prevents long term exposition of the transducer to high RMS levels
(abnormal when the music has a correct dynamic headroom). When the limiter led
lights up continuously, it means that the RMS limiter is active. On the other hand, the
Peak Limiter has an ultrafast attack to control the highest peaks of the music and
only makes the Led blink.
Thanks to the large experience of Amate Audio on DSP algorithms and limiters,
these limiters are highly effective but yet unnoticeable for the listener.
4.7.2. Automatic Temperature Limiter
Under normal operation, NÍTID amplifiers are able to perform during many hours at
full power. However, should the temperature in the amplifier rise abnormally, the
system will automatically adjust the limiter threshold to try to compensate for the
temperature raise. The system will progressively lower the output gain.
When the temperature lowers again, the system will recover its normal operation.
Should the temperature continue rising and reach 90ºC at the amplifier’s heatsink,
the system will shut down in Protection mode.
Language
English
Espanol
Back
System
Model: N10
Version: 1.0
Firmware : 1.1
Press OK to restore
Factory Settings
Factory Settings
Back
Restore
Fig. 27.
Language setting Menu
Fig. 28.
System information (left) and Factory Settings Restore Menu (right)
Summary of Contents for NITID N12A6
Page 1: ...User s manual July 2022...
