Amate Audio NITID N12A6, User Manual

Page: 18 / 24

NITID N12A6 Jul 2022
18
Amate Audio
The options available under the SETUP Menu are summarised in the following table.
For further information on each option, please read the following sections in this
chapter.
OFF ON
ECO Mode
System will never go in
low power mode System will go in low power mode
after 1 minute without input signal
Front LED
Front NITID Logo
always OFF
Front NITID Logo always ON
Front Lim. Indication
Limiter status is not
indicated on the front
Logo
Front LED ON: Logo lights OFF
when limiting
Front LED OFF: Logo lights ON
when limiting
Mute
Normal operation Amplifier is MUTED
LCD Backlight
Backlight dims
after 30 seconds
Backlight is always ON
Keypad Lock
Keypad will never lock
Keypad will lock after
30 seconds of inactivity
4.5.1. ECO Mode
When the ECO Mode is ON, the system will continuously analyse the input signal.
When no input signal is present after 1 minute, the system will go in a low power
consumption mode (standby). This condition will be indicated by a message in the
LCD. When the audio signal is present again, the system will wake up and continue
playing.
When the ECO Mode is active, the word Eco will be displayed in the main screen.
The system needs about 2 seconds to wake up from the low power
consumption mode. It is not recommended to use it for time-critical
applications.
4.5.2. Front LED
NÍTID active systems have a LED-backlighted logo on their front grill. By default, the
logo will light up when the cabinet is powered on. Select OFF to switch it off
permanently.
4.5.3. Front Limiter Indication
When this feature is set to ON, the front backlighted logo will also show when the
amplifier is limiting, depending on the setting of the front LED:
ECO Mode ECO Mode
Fig. 25.
ECO Mode option inactive (left) and active (right).