TCX-85
www.amano.com/time
•
1-800-253-9836
2-
7
Step 1
Remove the Cover & Packing Material
1.
Insert the key provided into keyhole on the top of the clock,
turn clockwise ¼ turn to
unlock the cover and
lift the
cover
to remove.
2.
Remove the
cardboard spacer
located above the
ribbon cartridge by
pulling straight out
(see right-hand
Figure).
3.
Lift up the printer
carriage by placing
your fingers
under the metal
motor on the left-
hand side and
remove the foam
spacer (white)
located under the
print head (see
right-hand Figures).
Release the printer
carriage.
4.
After removing the foam spacer with the cover off
plug in
the clock!
5.
The TCX-85 will announce “
Voice mode
enabled
” and display the time with
Setup
on
the bottom line.
Note
–
Should the clock not power up,
verify that the AC Adapter is plugged
into the rear of the clock.
