background image

2-2 

www.amano.com/time

  

 1-

800-253-9836  

TCX-85 

 

Proprietary Notice 

 

This document contains proprietary information and such information 
may not be reproduced in whole or part without the written permission 
from Amano Cincinnati, Inc. 140 Harrison Ave., Roseland, New Jersey 
07068. 

Amano Cincinnati, Inc. reserves the right to make equipment changes 
and improvements, which may not be reflected in this document. 
Portions of this document may have been updated to include the latest 
hardware or firmware version, if applicable.  

To ensure safe use of this time recorder/stamp, be sure to thoroughly 
read this manual in its entirety before any attempt is made to operate 
the equipment. After you have finished reading this manual, be sure to 
store it in a safe place for future reference. 

 

Thank You…. 

For purchasing another fine product from Amano Cincinnati, Inc. 

For Safe and proper operation, please carefully read the 
manual before using the time clock and save it for reference.

 

 

 

Warranty Notice 

Any claim for warranty, express or implied, due to the clocks failure to 
properly receive the radio signal because of interference, whatever 
may be the source of this interference, are hereby expressly excluded. 

The 

TCX-85

  has the atomic clock (radio-controlled clock) feature 

which displays the current time precisely by automatically receiving 
time code signals on long wave radio from the transmitting station. 
The unit receives the time code signal via its built-in antenna system. 

 

 

Note:

 

This equipment has been tested and found to comply with the 

limits for a Class A digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial 
environment.  This equipment generates uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is 
likely  to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 

 

 
 
 

Summary of Contents for TCX-85





























Reviews: