TCX-85
www.amano.com/time
•
1-800-253-9836
2-
17
Operation
Enable/Disable Atomic Clock Feature (
P5
12
)
1.
With the cover removed, press the
PROGRAM
button to
begin button program mode.
2.
Press the
+
button to change the current programming
mode until the display shows
P5 others
.
3.
Press the
ENTER
button once and the clock will display the
submenu for other settings such as
P5
01
.
4.
Press the
+
or
–
button until the display
shows
P5
12
atomic clock
.
[The second line will scroll]
5.
Press the
ENTER
button once and the clock
will start flashing the current atomic clock setting.
6.
Press the
+
or
–
button to change the value to either
enabled or disabled. The default setting = ENABLED [ON].
7.
Press the
ENTER
button once to accept the current
displayed value and go back to the previous menu.
8.
Replace the cover for normal operation.
Note FAQ
– If the Atomic Clock feature has been
turned off by setting to disable, pressing the “Reset”
button or changing the time will not turn the feature
back on. The feature must be Enabled by following the
steps above.
Ribbon Cartridge Replacement
Step 1.
Insert the clock key and turn clockwise to unlock the
cover, lift up the cover, and remove for ribbon access.
Locate the ribbon cartridge cradle (See page 2-3).
Note
–
You MUST have the key to remove the cover for
ribbon replacement.
