2-12
www.amano.com/time
•
1-
800-253-9836
TCX-85
Voice Programming Print Format Example
The following table lists the typical pattern of announcement
messages that the clock might play for changing print format.
Voice Message Prompt
Reason
“Welcome to the Amano time
Clock” “What would you like to
change?”
To greet the user and
prompt for command.
The User says “Print Format”
Request the clock to change
the print format.
“The current print format is”
followed by
“Please tell me the
new print format”
followed by a
BEEP
.
To announce the current
print format, request the
new print format and prompt
with
BEEP
.
The User says “Format Three”
Request the clock to set the
print format = Format 3.
“The new print format is format
three”
followed by
“What would you like to
change?”
To announce the new print
format set by the user and
inquire for the next possible
change.
The User says “Exit”
Request the clock to quit the
voice programming mode.
“Good Bye”
To acknowledge exit.
During a typical voice command, the clock might say;
•
“Sorry, Command not recognized”
To inform the user
that it could not understand the command so the user can
repeat the command again.
•
“Sorry, data not recognized”
To inform the user that it
could not understand the verbal value from the user for the
current setting so the user can repeat the value again.
