![background image](http://html1.mh-extra.com/html/amano/pix-95/pix-95_operation-manual_2918227006.webp)
PIX-95 www.amano.com
1-800-253-9836
pg. 6
Disabling or Enabling Daylight Saving Time
Note: Your clock is preset (Enabled) at the factory to change automatically for
daylight savings. To disable daylight savings follow the steps below:
1. Press and hold the
PROGRAM
button until
appears then
press the
CHANGE
button until
appears
.
2. Press the
ENTER
button.
3. Press the
CHANGE
button to alternate between
and
.
4. When the display flashes the correct setting, press the
ENTER
button.
5. The display will show
, press the
PROGRAM
button to exit the
Program Mode.
Changing the Begin / End Date for DST
Note that the government standard for DST is subject to change. Your clock is
factory-set for correct DST based upon when it was manufactured, but any
revision to DST begin or end dates may require updating the system-set DST
calendar.
The steps below change the begin and end date for DST. Updating the begin
date for DST needs to be done just one time, since the clock’s rolling calendar
function will auto-calculate the begin date for each year thereafter. To change
the
end
date for DST, refer to the next section.
1. Press and hold the
PROGRAM
button until
appears, then
press the
CHANGE
button until
appears and then press the
ENTER
button.
2. Press the
CHANGE
button until
(
flashes in the
display.
3. Press the
ENTER
button and the year will start to flash. Press
CHANGE
button until correct year is displayed and then press
ENTER
.
4. The month will start to flash. Press
CHANGE
button until correct month is
displayed and then press
ENTER
.
5. The date will start to flash. Press the
CHANGE
button until correct date is
displayed and then press
ENTER
button twice to accept changes.
6. Press the
CHANGE
button until
flashes in the display.
7. Press the
ENTER
button and the year will start to flash. Press
CHANGE
button until correct year is displayed and then press
ENTER
.
8. The month will start to flash. Press the
CHANGE
button until correct
month is displayed and then press
ENTER
.
ENABLED
DISABLED