1 947795
Issue 3
IP PoE Double Sided Analog Clocks
VIP-A12DS, 12” Round
VIP-A16DS, 16” Round
INTRODUCTION
The VIP-A12DS 12 inch Round Analog and
VIP-A16DS 16 inch Round Analog Clocks enable time
indication, synchronization, and correction over an
IP-based LAN/WAN. This allows locating a clock
display anywhere on the network. Clock
synchronization is initiated via connection to a factory
preprogrammed time server or can be programmed to
sync with any NTP (Network Time Protocol) server.
The enclosure is made of steel with a durable powder
coated finish. The color of the enclosure can easily be
changed to match any décor. Power is provided to the
VIP-A12DS and VIP-A16DS via a Power over Ethernet
(PoE) switch meeting the 802.3af specification. Only
one network connection is required, supplying power
and data to both clock displays.
SPECIFICATIONS
Features
High visibility white face
Shatterproof, polycarbonate crystal
802.3af Power over Ethernet (PoE) compatible
High
Efficiency
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case the
user will be required to correct the interference at
one’s own expense.
DIMENSIONS/WEIGHT
VIP-A12DS – 12.81” diameter x 7.00” depth
17.6” maximum extension from wall or ceiling
Weight: 11.00 lbs
VIP-A16DS – 16.81” diameter x 7.25” depth
21.6” maximum extension from wall or ceiling
Weight: 12.6 lbs
Nominal Power Requirements
802.3af PoE:
Class 3
Environment
Temperature:
0 to +45° C
Humidity:
0 to 85% non-precipitating
Precautionary Designations
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified serv ice personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Packing List
Qty. Item
2
12” or 16” Clocks
1 Network
Interface
1
Double Sided Housing
1 VSP
Document
