Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Do not install or operate near any heat sources
such as radiators, stoves, or other apparatus that
produce heat.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as the power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
Warning:
To reduce the risk of fire or electrical
shock, do not expose this product to rain or
moisture. The product must not be exposed to
dripping and splashing and no object filled with
liquids such as a vase of flowers should be placed
on the product.
No naked flame sources such as candles should
be placed on the product.
Caution:
Changes or modifications not expressly
approved by the manufacturer could void the
user’s authority to operate this device.
Caution:
Usage of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
exposure.
IMPORTANT
This equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communication. However, this is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
ELECTRICAL INFORMATION
Mains Supply:
The mains operating voltage of
this unit is marked on a rating plate on the rear
of the unit.
The means of disconnecting this appliance from
the mains supply is the mains plug. This should be
unobstructed and readily operable at all times.
Tesco Stores Ltd, Delamare Road, Cheshunt,
Herts, EN8 9SL
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
This symbol indicates that dangerous
voltage constituting a risk of electric shock
is present within this unit.
IMPORTANT SAFETY INFORMATION
PRELIMINARIES
FITTING BATTERIES
REAR / UNDERSIDE VIEW
TOP VIEW
UNPACKING
Carefully unpack the unit. If it is damaged,
please return it to your nearest Tesco store for
replacement. Remember to take your purchase
receipt with you.
Retain the User Handbook. If you pass the unit
on to a third party make sure you pass on the
handbook.
We suggest you retain the packaging. If you
dispose of it, do so having regard to any recycling
regulations in your area.
CONTENTS
The carton should contain:
• The CR112DABV digital radio
• Operating Manual
If any items are missing or damaged, contact your
nearest TESCO store for a replacement. Have
your receipt ready when you call.
Retain the packaging.
If you dispose of it, do so having regard to any
recycling regulations in your area.
LOCATION
Place the unit on dry stable surface away from
heat and damp and where it is unlikely to fall or
be knocked over.
1. Speaker
2. PRESET button
3. button
4. button
5. BACK/SCAN button
Un clip the battery cover in the direction indicated.
Lay the ribbon over the battery compartment.
Batteries are to be placed on top of the ribbon.
Fit 6 x AA batteries in the sequence shown,
observing polarity.
Refit the battery cover.
Switching on your radio for the first time
1 Mains Adaptor (supplied with the package)
Connect the mains adaptor to the DC power
socket on the rear of the radio ( if not using
batteries ).
2
Extend the pig tail aerial as far as it can go.
3
Slide the
Power ON/OFF
switch to
ON
to turn
on the radio.
The radio will automatically tune and operate the
quick scan.
During scan mode, the LCD will display a slide
bar that indicates the progress of the scan, and
the amount of radio stations that have been
found so far.
Once the scan has finished, the radio will select
the first alphanumeric station.
NOTE:
The station name will be shown on the
top of the display. Information about the DAB
radio station will be displayed on the bottom of
the display
Preset Memory
When you power up the radio again, the radio
plays in the same mode (
DAB
or
FM
) as last
chosen.
If you hear no sound, then press the “
VOL +
”
control until you reach a desired level.
If the volume is too high, then press the “
VOL -
”
control to decrease the volume level.
To listen to your desired stations press either
the / buttons to cycle through the stored
stations. When you reach your desired station
stop pressing the / buttons and the radio will
automatically tune to that station. The display will
now change to show the station name on the top
of the screen and information about the station on
the bottom of the screen.
Press the (standby) button to turn off the radio.
To turn the radio on press the (standby) button.
1. To set manually, press and hold the
INFO/MENU
button for 3 seconds.
2. When the <Scan Setting> option appears press
either or
and find <System>.
3. Press the
ENTER
button, use the / buttons
to find <Time> and press
ENTER
.
Inside the <Time> menu there are several
options. <Set 12/24 Hour>, <Set Time/Date>,
<Auto Update> & <Set Date Format>.
<Set 12/24 Hour>
Use the / buttons to select
12 or 24 hour and then press the
ENTER
button
to activate.
<Set Time/Date>
When activated the hour digit
flashes, use the
/ buttons to set the digit to
the correct hour then press
ENTER
, repeat for the
minutes again pressing
ENTER
when set.
The process for setting the date is exactly the
same as the above. Press
ENTER
to finalise the
setting once complete.
<Auto Update>
Use the / buttons to cycle
through the various options for auto setting the
time & date. These range from. <Update from
any>, < Update from DAB>, < Update from FM>
and <No Update>.
NOTE:
When the power is switched
OFF
( not
standby ) the settings will be lost.
<Set Date Format>
Use the / buttons to
set
DD-MM-YYYY
or
MM-DD-YYYY.
Press the
ENTER
button to store.
To finalise selections do not touch any buttons
for ten seconds. The unit will exit to the station
selection screen.
Alarm Setting
1. Press and hold the
INFO/MENU
button for 3
seconds.
2. When the <Scan Setting> option appears press
either or
and find <System>.
3. Press the
ENTER
button, use the / buttons
to find <Alarm> and press
ENTER.
Alarm Setup
Press
ENTER
to initiate the setup process.
1. Use the
/
buttons to select Alarm 1 or
Alarm 2
then press
ENTER
to activate.
2. Use the
/
buttons to select Alarm
ON
or
OFF
then press
ENTER
to set.
3. Use the /
buttons to set the Alarm ON hour
digits. Press
ENTER
to set.
4. Set the Minute digits the same way and press
ENTER
once set.
5. Choose the source of the alarm between
BUZZER
,
DAB
&
FM
using the /
buttons.
If you choose DAB or FM the next step is to
choose the station you want to play.
Welcome to
Digital Radio
Scanning... 34
6. ENTER button
7. Display
8. SNOOZE/SLEEP button
9. (standby) button
10. INFO/MENU button
11. DAB/FM button
12. VOLUME -
13.
14. 1-10 Preset buttons
6. There is the option to only have the alarm
activate on
WEEKDAYS
,
DAILY
and
WEEKENDS
. Choose which you require using
the / buttons.
The
ENTER
button stores the setting.
7. The next step is to set the volume level you
require. use the / buttons to set
and press
ENTER
to activate the alarm.
8. To disable the alarm return to the <Alarm>
screen and use the / buttons to
choose
OFF
and press
ENTER
to save.
9. To silence the alarm when sounding press the
ENTER
button.
10. Repeat the procedure 1-9 to set Alarm 2.
NOTE:
In standby the alarm icon
will display
when activated.
Snooze Mode
When the alarm sounds you can press the
SNOOZE/SLEEP /
button to activate the
SNOOZE
mode and delay the alarm for
5
minutes.
SNOOZE/SLEEP
1-6
2-7
3-8
4-9
5-10
PRESET
VOL
VOL
BACK/
SCAN
INFO/
MENU
ENTER
DAB/FM
OPEN
CLOSE
RIBBON
1
3
2
4
19
5
16
15
17 18
6 8
7 9
12
11
10
13 14
SNOOZE/SLEEP
1-6
2-7
3-8
4-9
5-10
PRESET
VOL
VOL
BACK/
SCAN
INFO/
MENU
ENTER
DAB/FM
OPEN
CLOSE
RIBBON
1
3
2
4
19
5
16
15
17 18
6 8
7 9
12
11
10
13 14
SNOOZE/SLEEP
1-6
2-7
3-8
4-9
5-10
PRESET
VOL
VOL
BACK/
SCAN
INFO/
MENU
ENTER
DAB/FM
OPEN
CLOSE
RIBBON
1
3
2
4
19
5
16
15
17 18
6 8
7 9
12
11
10
13 14
SNOOZE/SLEEP
1-6
2-7
3-8
4-9
5-10
PRESET
VOL
VOL
BACK/
SCAN
INFO/
MENU
ENTER
DAB/FM
OPEN
CLOSE
RIBBON
1
3
2
4
19
5
16
15
17 18
6 8
7 9
12
11
10
13 14
GETTING STARTED
GENERAL OPERATION
GENERAL OPERATION
DAB/FM clock radio
CR112DABV
Owners Handbook
SNOOZE/SLEEP
1-6
2-7
3-8
4-9
5-10
PRESET
VOL
VOL
BACK/
SCAN
INFO/
MENU
ENTER
DAB/FM
15. Antenna
16. POWER switch
17. DC power input
18. EARPHONE output
19. Battery compartment
1
2
3
4
