Page 14
PIX-21 Operation Manual
Amano Cincinnati, Inc.
Replacing the Ribbon
To Remove:
To Insert:
Pull the two catches upward “B” and
hold with index and middle fingers.
Remove the ribbon cassette.
1.
If the print mechanism is down
and a piece of paper cannot be
inserted, press the RESET
button to move the carriage up.
This will make the ribbon
installation easier.
2.
Insert a new ribbon between the
ribbon guide (C) and the printer
head (D).
3.
Turn the knob on the cassette
clockwise one turn to take up any
slack in the ribbon.
4.
Replace the cover.
5. Check the printing quality to
confirm that you have installed
the ribbon properly.
Adjusting the Margin
1.
Remove the Mounting Bracket.
2.
Locate the Card Stopper
Adjustment Screw behind the
Wall Mounting Bracket on the
bottom of the machine.
3.
Position a piece of paper or time
card and adjust the screw
accordingly. The print margin can
be adjusted a maximum of 22mm
(7/8”). There are ruler markings
on both sides of the base plate to
help you align the card.
