Amano Pioneer Eclipse PE350BU, Operator'S Manual

Page: 15 / 34

15
8. Remove the center device by turning counter-
clockwise and carefully remove the old pad from the
Velcro material.
CAUTION! CAREFULLY INSPECT THE PAD
HOLDER FOR CRACKS OR DAMAGE! REPLACE
IF NECESSARY.
WARNING! A DAMAGED PAD HOLDER
ROTATING AT HIGH SPEEDS MAY BE AN
EXTREME HAZARD IF IT SHOULD COME
APART.
9. Pull center from new pad, align pad on pad holder
and secure with centering device by turning
clockwise.
10. Press pad firmly onto pad holder face.
11. When lowering the machine down, do not drop it.
Slowly lower the machine to the floor until the wheels
are on the ground.
Empty & Replace Dust Bag
1. Remove the dust bag cover by lifting upward on the
back of the cover.
2. Remove the dust bag by working the elastic over the
lip of the rubber grommet and pulling toward the rear
of the machine.
3. Empty bag by rubbing or gently tapping on sides, in a
downward motion, to loosen soil trapped on sides of
bag. For heavy soil, turn bag inside out to clean.
4. Check the dust tube for debris and clear if needed.
5. Reinstall dust bag by working the elastic band over
the lip of the rubber grommet.
6. Stretch the dust bag towards rear of machine and
orientate with the zipper facing downward.
Wheel Adjustment
1. Raise the handle to the full-up position (about a 45°
angle).
2. Rock the machine by lifting up on the front of the
machine until it rests on the handle grips.
3. Remove the pin that retains each wheel and relocate
to the desired wheel position.
NOTE: To increase pad pressure (more aggressive)
move wheels to rear of machine. To decrease pad
pressure (less aggressive) move wheels toward the
front of machine.