background image

6

Safety Precautions

Anyone operating the machine should read the 

following carefully and be informed of potentially 

dangerous operating conditions.  Operators should 

be familiar with the location and use of all safety 

devices on the machine.  DO NOT use the machine 

if it is not in proper operating condition, and report 

any damage or operation faults immediately.

DANGER!

  This machine has parts including the pad 

assembly that can cause severe injury if these parts are 

contacted while they are moving. 

DO NOT

 allow any 

part of the body or clothing to come in contact with these 

parts while they are moving. 

DO NOT

 try to change the 

pad while the machine is running. 

DO NOT

 allow other 

people to come near the machine while it is in operation. 

DO NOT

 allow the machine to run unattended. 

DO NOT

 

leave the machine in a place where unauthorized or 

untrained personnel could use the machine. 

DO NOT

 

run the machine with the pad off center, damaged or 

missing. 

DO NOT

 operate the machine if the machine 

has loose parts.

WARNING!

  The battery emits hydrogen gas. Explosion 

or fire can result. Keep sparks and open flame away. 

Keepcovers open when charging. DO NOT smoke 

around batteries. 

WARNING!

  Operate from the rear of the machine only.

WARNING!

  Inspect pad holder regularly. A fractured pad 

holder may result in pad fragments causing injury.

WARNING!

  Use caution when operating the machine on 

a ramp or incline. 

DO NOT

 turn the machine, or leave it 

unattended, on a ramp or incline.

WARNING!

  Store machine inside. Keep the electrical 

components of the machine dry. 

DO NOT PRESSURE 

WASH MACHINE

.

WARNING!

  Modifications or alterations to this machine 

can lead to personal injury or damage to the machine. 

DO NOT

 make unauthorized modifications or alterations 

to this machine. Amano Pioneer Eclipse assumes 

no liabilities for injury or damage resulting from an 

unauthorized modification or alteration to the machine. 

Any unauthorized modification or alteration to this 

machine voids all warranties.

WARNING!

  The motor, motor controller, and charger 

become hot enough while the machine is in operation, 

and for a long time after the machine is shut off, to 

cause severe burns. 

DO NOT

 touch these parts of the 

machine until they have cooled.

WARNING!

  Injury can occur to the eyes and body while 

using the machine. Safety goggles, safety shoes, and 

safety clothing are recommended while operating the 

machine.

WARNING!

  Machine vibration may cause tingling 

or numbness in the fingers or hands.  Gloves are 

recommended to reduce machine vibration. If tingling or 

numbness persists, shut off the machine. If the vibration 

is caused by loose parts such as an off center pad, 

adjust or tighten these parts before using the machine 

again.

WARNING!

  Do not charge the battery with damaged cord.  

Do not modify the plug.  If the charger cord is damaged, 

it must be replaced.

WARNING!

  

DO NOT

 burnish on an incline. This machine 

is designed to burnish on a flat level floor.

CAUTION!

  

DO NOT

 operate machine unless trained and 

authorized. 

DO NOT

 operate machine unless you have 

read and understand the operation manual. 

DO NOT

 

operate machine in flammable or explosive areas.

CAUTION!

  Before starting machine ensure all safety 

devices are in place and functioning properly. Before 

starting machine check for proper operation.

CAUTION!

  When using machine, go slowly on inclines. 

Use care when operating machine in reverse. 

CAUTION!

  When servicing machine, stay clear of 

moving parts. 

DO NOT

 wear loose clothing when 

working on machine. Block machine wheels before 

raising or jacking up machine. Use hoist stands that 

will support the weight of the machine. Wear eye and 

ear protection when using pressurized air. Disconnect 

battery connections before servicing machine. Use only 

replacement parts supplied by Amano Pioneer Eclipse 

or a Amano Pioneer Eclipse Authorized Distributor or 

Service Center.

Summary of Contents for Pioneer Eclipse PE350BU



































Reviews: