16
Maintenance
Interval
Operation
Daily
Every
25 Hrs
Every
50 Hrs
Every
100 Hrs
Every
200 Hrs
Every
500 Hrs
Every
1000 Hrs
Empty/clean dust bag
l
Inspect pad holder
l
Check wiring harness for fray or cut
l
Check for loose/missing nuts or screws
l
Tighten nuts and screws
l
Inspect drive belt
l
Check / Replace dust skirt edging
l
Replace drive belt
As Required
Scheduled Maintenance
These items must be performed with the proper tools and training. Contact a Amano Pioneer Eclipse
Factory Certified Technician unless you have the proper equipment and mechanical proficiency.
Handle Adjustment
1. The height of the handle can be adjusted by raising or
lowering the handle.
2. Loosen the handle pivot knobs on thedes of the
bulkhead, turning the right side counter-clockwise
and the left side clockwise.
3. Move the handle in and out to the desired height
4. Tighten the handle pivot knobs.
Post Operation Checklist
Turn the machine OFF and perform the following
checks:
l
Check for wire, string, or twine wrapped around the
burnish pad.
l
Check for frayed wires or damage.
l
Empty the dust collection bag.
l
Check dust skirt wear edge and replace as needed.
l
Plug in on-board battery charger.
LOOSEN
HANDLE
PIVOT KNOBS
PULL
HANDLE
OUT
ROTATE
HANDLE
PUSH
HANDLE IN
TIGHTEN
HANDLE
PIVOT
KNOBS
LOOSEN
HANDLE
PIVOT KNOBS
PULL
HANDLE
OUT
ROTATE
HANDLE
PUSH
HANDLE IN
TIGHTEN
HANDLE
PIVOT
KNOBS
LOOSEN
HANDLE
PIVOT KNOBS
PULL
HANDLE
OUT
ROTATE
HANDLE
PUSH
HANDLE IN
TIGHTEN
HANDLE
PIVOT
KNOBS
Summary of Contents for Pioneer Eclipse PE350BU
Page 1: ...UHS Battery Burnisher PE350BU Operator s Manual...
Page 31: ...31...
Page 32: ...32...
Page 33: ...33...