21
•
Confirm unit is on grounded and polarized
circuit.
•
Check fuse or circuit breaker. Determine if
circuit is operable by plugging another item in
outlet.
•
Confirm microwave oven door is securely
closed.
•
If condition remains unchanged, see
"Unchanged Condition" instructions below.
If control will not accept instructions:
•
For cooking to temperature, confirm probe jack
is securely inserted into oven receptacle.
•
For cooking by time, see "Unchanged
Condition" instructions below.
If readout appears wrong:
•
Press
STOP/RESET
.
•
See "Unchanged Condition" instructions
below.
WARNING
To avoid electrical shock, personal injury or death, do not remove outer case at any time.
Only authorized servicer should remove outer case. If removed by another person, warranty
is void.
Any questions or to locate an
authorized
Amana servicer, call
1-319-622-5511.
Contact an
authorized
Amana servicer if service is required. When contacting us, provide product information including
serial numbers
and
date of purchase
. Model and serial numbers are located on appliance nameplate
located on upper left oven wall interior.
•
Confirm light bulb is not defective.
If room lights dim or pulse when oven is in use:
•
Confirm microwave is on proper circuit. See
grounding instructions on page 5.
If unit operates, but will not heat food:
•
Place one cup cool water in unit. Heat for one
minute. If water temperature does not rise,
unit is operating incorrectly.
If temperature probe is not functioning correctly:
•
Confirm probe jack is securely inserted into
receptacle.
•
Confirm food is not hotter than programmed
temperature.
•
Confirm food is completely defrosted.
•
Confirm probe was not left in oven when using
another method other than temperature
cooking.
If dash lines appear in display:
•
This is a power interruption signal and will
appear whenever oven is initial plugged in or
when power is interrupted. Set the clock to
clear.
Unchanged Condition
If condition remains unchanged, perform the
following steps:
1. Check to see if fuse or circuit breaker is
open.
2. Unplug oven.
3. Reconnect oven to wall outlet. Dash lines
appear in display.
4. Press
STOP/RESET
or set clock.
