![background image](http://html1.mh-extra.com/html/amano/axp-100/axp-100_operation-manual_2918202032.webp)
5-6
Amano AXP-100 Operations Manual
Door Mode
The settings for the Door mode cover the following:
a. Choice of Alarm or Intrusion warning system. The alarm can be used
only if an alarm panel has been installed with the AXP-100 unit. If an
alarm panel has not been installed then “Intrusion” must be selected.
b. Control of PIN codes.
c. Control of Reason codes.
d. Control of Door response to tag groups.
The last three items listed above fall under the “Advanced” setting in the
Door Mode box.
Alarm
To set the system to work in the Alarm Mode (that is, with the alarm) use the
mouse to click on the
Alarm
button in the Door Mode box. Please note that
the alarm should only be selected if an alarm panel has been fitted in the
system.
Intrusion
To set the system to work in the Intrusion mode use the mouse to click on
the
Intrusion
button in the Door Mode box.
Summary of Contents for AXP-100
