35
gB
O P e r at I n g I n s t r U C t I O n s
Upgrade kit
Multi-x
Factor printed upon the blank form.
7.2
MICrOMeter sCrew
Loosen the upper screw of the milling guide
BP
with 1/2 to 3/4
of a turn.
Loosen the lower screw of the milling guide with 1/2 to 3/4 of
a turn.
CaUtIOn!
Do not loosen any other screws!
CaUtIOn!
Do not loosen any other screws, in particular not
those at the micrometer screw (see image)!!!
The value for the multiplier indicated on the blank form is adjus-
ted using the two micrometer screws
BU
manually or using a hex
wrench.
During adjustment of the multiplier value, do not hold or pull
the handpiece.
Summary of Contents for ceramill multi-x
Page 2: ..._Deutsch 04 25 _English 26 47 _Fran ais 48 69 _Italiano 70 91 _Espa ol 92 113...
Page 114: ......
Page 115: ......
