20
Removing Oven Door
1. Open door to first stop.
2. Remove screws on each side of lower oven door.
3. Grasp door firmly on each side and lift upward until
door is off hinges.
• Do not lift door by handle. Glass can break.
• Only push hinges closed once oven door is
removed if necessary. Use both hands when
closing hinge. Hinge snaps closed.
CAUTION
To avoid personal injury or property damage, handle
oven door with care.
• Door is heavy and can be damaged if dropped.
• Avoid placing hands in hinge area when door is
removed. Hinge can snap closed and pinch hands.
• Do not scratch or chip glass, or twist door. Glass
may break suddenly.
• Replace door glass if damaged.
Care and Cleaning
Removing Coil Surface Elements
1. Hold hand above surface element to detect heat
before touching. Do not touch if heat is detected.
2. Grasp element at end opposite from receptacle and
lift approximately an inch.
• Element clip holds surface element in place.
3. Pull surface element out of receptacle and set aside.
4. Reverse procedure to reassemble.
S u r fa c e E le m e n t
R e c e p ta c le
C lip
B u r n e r B o w l
WARNING
To avoid risk of personal injury, do not touch surface
elements or area near elements without checking for
heat. Surface elements may be dark in color even
when hot. Hold hand above surface element to
detect heat before touching. Areas near elements
may be hot enough to burn.
CAUTION
To avoid personal damaging oven door, do not lift or
move range by oven door handle. Glass can break.
Summary of Contents for ZRRS6550
Page 50: ...50 ...
Page 51: ...51 ...
Page 52: ... 1997 Amana Amana Iowa 52204 Part No 36 31731201 0 Printed in U S A ...