4
FAN SPEED (LOW, MED, HIGH) - FAN
selects either a low, medium or high fan
speed to cool.
ENERGY SAVER - ENERGY SAVER mode
provides the most energy efficient use of your
room air conditioner. This feature can be used
with SMART COOL or cooling with any fan speed.
Amana’s Temp-Asure
®
air sampling system works to main-
tain the set temperature within 1.5°F while in ENERGY
SAVER mode. Approximately every 5 minutes the fan will
come on and “sample” the room air to determine if cooling
is needed. If the room is cool enough, the fan will cycle off.
If the room needs further cooling, the compressor will
engage along with the fan until the set temperature is
reached.
ENERGY SAVER has a soft start fan feature. This feature
starts the fan in low to reduce noise.
ACTION AIR - ACTION AIR provides uni-
form cooling with a power sweeping action
to move the cooled air around the room.
This feature can be turned on and off by
pressing this button.
ARROW KEYS - These keys increase or
decrease the set temperature and clock
setting.
CLOCK - The CLOCK button sets the
clock. The arrow keys adjust the time. To
exit clock mode, press the clock button.
The time of day will be displayed.
Note: Pressing this button twice quickly changes the
mode from time to temperature and vice-versa. To briefly
display the time (if temperature is currently displayed) or
temperature (if time is currently displayed), press either the
up or down arrow key.
TIMER - The TIMER button is used to turn
the TIMER on and off as well as set the
TIMER. The timer has four different timer
periods, P1, P2, P3, and P4. Each period can be pro-
grammed with a different temperature setting and opera-
tional mode. See page 5 for operation details.
Operation
Vent Control
Open or close the vent by sliding the vent control lever to
the appropriate setting.
EXHAUST - This setting opens the vent to move indoor air
out.
Note: To conserve energy, the unit should be set to FAN
mode when using this setting.
CLOSED - In this position the vent is closed and room air
is recirculated and filtered. This position should be used
for all normal cooling operations.
FRESH AIR - This setting opens the vent to move outside
air indoors.
Note: To conserve energy, the unit should be set to FAN
mode when using this setting.
Unit Control
OFF - Turns the unit off. To turn the unit on,
press SMART COOL or MODE.
SMART COOL - SMART COOL adjusts the
fan speed of the unit to achieve the selected
temperature. The SMART COOL feature
uses computer logic to cool the room quickly
and quietly. Fan speeds start high, automatically switch to
medium and finally go to low as the room temperature
nears the set temperature.
MODE (COOL,DRY, FAN) - MODE is
used to switch the operational mode of the
control between the COOL, FAN, and DRY
modes. If the unit is off when this button is
pressed, the unit will come on with the last mode and
temperature setting.
MODE
COOL
DRY
FAN
ENERGY
SAVER
ACTION
AIR
CLOCK
TIMER
Control Panel
U LTR A Q U IET ZO N E
EXHAUST CLOSED FRESH AIR
OFF
SMART
COOL
U LTR A Q U IET Z O N E
EXHAUST CLOSED FRESH AIR
COOL
DRY
HIGH
FAN
MED
LOW
CLEAN FILTER
LOC KOUT
OFF
SMART
COOL
MODE
FAN
SPEED
ENERY
SAVER
ACTION
AIR
SET
CLOCK TIMER
SLEEP
LOW
HIGH
MED
FAN
SPEED
SET
