6
SLEEP - The SLEEP button starts a program
that adjusts the cooling comfort level. The
program raises the cooling temperature 1°F
every hour for the next four hours.
LOCKOUT - LOCKOUT is a new child-
proof feature of the new Ultra Quiet Zone
room air conditioner. This feature pre-
vents altering of the current settings on the unit.
To activate, press and hold for two sec-
onds the up and down arrow keys at the
same time. When the LOCKOUT LED
lights up, the function is activated. The
only command that is available during
lockout is the OFF button for deactiva-
tion. To deactivate lockout, press the
arrow keys at the same time and hold until
the LOCKOUT LED goes off.
Note: To turn off the display, press and hold the OFF and
CLOCK buttons at the same time until the display turns off.
CLEAN FILTER - After 250 hours of fan
runtime, the clean filter will flash. This is
a reminder to remove and clean the filter.
To reset the counter and stop the flashing, press the OFF
button twice.
SLEEP
CLEAN FILTER
LOCKOUT
CLEAN FILTER
LOCKOUT
Special Features
Variable Differential Control (VDC)
This feature controls the temperature difference between
when the unit turns off and restarts especially useful for
extended periods outside the room. Normally, the unit will
cycle on and off to maintain within 1.5°F of the temperature
setting. VDC enables the user to change this differential
from 1.5°F to as much as 7.0°F.
To change the differential:
Be sure the unit is off.
Press and hold the OFF and FAN SPEED buttons. When
the characters d#.## (“#.##” is the current value of the
differential) are displayed, use the arrow keys and change
the differential.
Note: The differential defaults to 1.5°F. It changes in
increments of 0.5°F. The maximum change is 7°F.
If the OFF and FAN SPEED buttons are released during the
setup, the VDC mode will be cancelled and the unit will shut
off.
Intellistat
This feature expands the use of normal delay timers by
using sophisticated adaptive computer logic. The delay
timer is set using the clock. Instead of turning on and off in
a preset number of hours, Intellistat works to be at the set
temperature at the set time. For example, if you want the
room to be 72°F at 5:00 p.m., the Intellistat feature will start
the unit prior to 5:00 p.m. so that by 5:00 p.m. it will be at
your selected temperature.
(2 seconds)
SET
