Amana RMC810 Series, Owner'S Manual & Cooking Manual, Page: 10 / 40

10
Operation
Clock
Electronic digital clock operates when power is
supplied to oven. When oven is plugged in,
“0” displays.
1.
Press CLOCK pad.
• “ENTER” and “TIME” flash and “12:00” shows in
display.
2. Press numbered pad for correct time of day.
• Selected time of day appears in display. For
example, to set the clock for 12:30, press 1,2,3,0
in sequence. Clock does not designate
am or pm.
3. Press CLOCK pad.
Micro Time Entry Cooking
Use to cook with microwave energy only.
1.
Press MICRO TIME ENTRY pad.
• "0" displays and “ENTER”, “COOK”,
and “TIME” flash.
2. Press numbered pads for desired cooking time.
• To cook at high power, press
START pad.
• Selected numbers display. “ENTER” and
“START” flash.
3. Press COOKMATIC LEVEL pad.
• “P-HI” displays. “ENTER” and “POWER” flash.
4. Press numbered pads for desired cooking power.
• Selected power displays. For example, to cook
at 70% power, press numbered pad 7. “P-70”
displays.
• “ENTER” and “POWER” flash in display.
5. Press START pad.
• Oven begins cooking.
• Oven light turns on and “COOK” shows in
display.
• Display alternates showing cooking time counting
down and power level.
• When cooking is complete, signal sounds. “END”
displays.
• Press STOP/RESET pad or open oven door to
return display to time of day.
Preheat for Convection Cooking
Oven should be preheated when cooking with
convection or combination cooking method. Place
convection rack in oven before preheating. Preheat
temperatures range from 225 to 450°F. Raise oven
temperature 25°F above recipe temperatures not in this
manual.
CAUTION
To avoid burns use utensils or protective clothing,
like pan grips or dry oven mitts. Racks, utensils, and
oven surfaces can become hot during or after use.
1. Press CONVECTION pad twice.
• “PRE-H” and “CONV” show in display. “ENTER”
and “TEMP” flash in display.
2. Press numbered pad with desired oven
temperature.
• Temperatures are located in upper left corner of
numbered pads. For example, if 400°F, press 9.
Preheat oven to temperature required for recipe.
• Selected temperature and “CONV” show in
display. “ENTER”, “COOK”, and “TIME” flash in
display.
3. Press START pad.
• Oven turns on. “PRE-H” shows and “CONV”
flashes in display.
4. When preheat is complete, “PRE-H” and “CONV”
flash and signal sounds.
• Oven holds preheat temperature for 30 minutes if
oven door is not opened or STOP/RESET pad
pressed. Press START pad to continue paused
preheat.
• Press STOP/RESET pad and proceed with
“Convection Cooking” section.