Amana NTW5400T, Technical Education, Page: 41 / 64

4-
REMOVING THE PUMP AND MOTOR
1. Unplug washer or disconnect power.
2. Tilt the cabinet forward and remove cabi-
net (see page 4-6 for the procedure).
3.
To remove the pump:
a) Place a container near the two pump
hoses to catch the water.
Release Spring Clips
Drain Hose
Tub Outlet Hose
b) Loosen the two clamps from the tub
outlet and drain hoses and pull the
hoses off the pump.
c) Release the two spring clips and pull
the pump away from the motor.
REASSEMBLY NOTE: Position the pump on
the motor shaft with the feet in the bracket in-
dents (circled below).
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
Motor
Pump
Continued on the next page.