12
Changing user options
Options such as single or double pad programming and beep volume can
be changed to suit individual preferences.
To change options:
1. Press hidden pad.
Pad is unmarked.
! The display remains blank
when hidden pad is pressed.
2. Press PROGRAM SAVE pad.
. Oven is now in options mode.
3. Press number pad that controls option to be changed.
See table below for options.
Current option will display.
4. Press number pad again to change the option.
Each time pad is pressed, option will change.
Match code displayed with code for desired option.
Changes take affect after pad is pressed.
To change additional options, repeat steps 3 and 4.
5. Press PROGRAM SAVE to return to READY, or open and close oven
door.
HIDDEN
PAD
No popcorn
No metal pans
DO NOT power spray
Numbered Pads
Displays
Options
1
Double Digit Entry
Disabled
Enabled
Allows 10 (0-9) preprogrammed pads.
Allows 100 (00-99) preprogrammed pads.
2
Manual Programming
Disabled
Enabled
Manual time entry/cooking not allowed
Manual time entry/cooking allowed
3
Reset on Door Open
Disabled
Enabled
Opening oven door does not reset oven back to ready
Opening oven door resets the oven back to ready mode
4
Keybeep
OFF
ON
Keys do not beep when pressed (keybeep off)
Keys beep when pressed (keybeep on)
5
Speaker Volume
OFF
LOW
MEDIUM
HIGH
Keybeep volume OFF
Keybeep volume LOW
Keybeep volume MEDIUM
Keybeep volume HIGH
6
End of Cook Signal
Solid Beep
3 Second Beep
4 Beeps Once
4 Beeps Repeating
Food done signal is a continuous beep until reset by user
Food done signal is a three second beep
Food done signal is four beeps continously
Food done signal is four beeps, four times
7
Keypad Active
15 Seconds
30 Seconds
60 Seconds
120 Seconds
Always
Keypad time entry window is 15 seconds
Keypad time entry window is 30 seconds
Keypad time entry window is one minute
Keypad time entry window is two minutes
Keypad time entry window is always active
Stage Pad
Clean Filter Message
(Frequency)
Disabled
Weekly
Monthly
Quarterly
Oven will not display Clean Filter
Oven will display Clean Filter every seven (7) days
Oven will display Clean Filter every thirty (30) days
Oven will display Clean Filter every ninety (90) days
Refer to Product Safety Manual for Safety Statements
Complete Owner’s Manual available online
Quick Start Reference Guide
Amana
HIDDEN
PAD
Menumaster
(Factory settings bold)
SAMPLE
Summary of Contents for KFC2W2
