12
1
2
Looking Inside
Fresh food shelves are easily adjusted to suit individual needs.
Before adjusting the shelves, remove all food.
To adjust cantilever shelves
(some models)
:
NOTE:
Cantilever shelves are supported at the back of the refrigerator.
Lift front edge up.
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the desired shelf into the wall bracket. Lower the shelf into
the slots and lock into position.
Spillsaver
TM
glass shelves (some models) catch and hold accidental spills. Some models have Easy Glide
TM
shelves that slide forward for easy access to food and for fast cleaning. Easy Glide
TM
shelves slide
independently of the cantilever brackets by pulling the shelf forward. The shelf can be extended as far as the
stop will allow but it is
not
removable from the cantilever bracket.
Full Width Cantilever Glass Shelf
Cantilever Glass Shelf - Easy Glide
Cantilever Glass Shelf
CAUTION
!
To avoid risk of personal injury or property damage, observe the following:
Verify shelf is secure before placing items on shelf.
Handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched or exposed to
sudden temperature change.
Shelf Adjustment
1
2
1
2
Side-rail Glass Shelf
NOTE:
Some shelves may be either wire or glass side-rail.
To adjust side-rail shelves
(some models)
:
NOTE:
Side-rail shelves are supported on side of unit.
Remove shelf by pulling forward to stop position.
Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this procedure.
