Amana ADVC8 Series, Brochure & Specs

Page: 7 / 12

SS-AMVC8 www.amana-hac.com 7
6 www.amana-hac.com SS-AMVC8
p
roDuCT
S
peCiFiCATionS
p
roDuCT
S
peCiFiCATionS
AMVC8 A
irFlow
D
ATA
(
ConT
.)
H
eATing
S
peeDS
AMVC80604B**
(Rise Range: 20° - 50°F)
AMVC80805C**
(Rise Range: 20° - 50°F)
Cooling
Speed Tap
Adjust
Tap
Low-Stage
CFM¹
High-Stage
CFM¹
Rise
(°F)
Cooling
Speed Tap
Adjust
Tap
Low-Stage
CFM¹
High-Stage
CFM¹
Rise
(°F)
A
Minus (-) 790 1125 46
A
Minus (-) 945 1350 49
Normal 875 1250 41 Normal 1050 1500 44
Plus (+) 960 1375 38 Plus (+) 1155 1650 40
B
Minus (-) 850 1215 43
B
Minus (-) 1010 1440 46
Normal 945 1350 38 Normal 1120 1600 42
Plus (+) 1040 1485 35 Plus (+) 1230 1760 38
C
Minus (-) 915 1305 40
C
Minus (-) 1070 1530 44
Normal 1015 1450 36 Normal 1190 1700 39
Plus (+) 1115 1595 33 Plus (+) 1310 1870 36
D
Minus (-) 975 1395 37
D
Minus (-) 1135 1620 41
Normal 1085 1550 33 Normal 1260 1800 37
Plus (+) 1195 1705 30 Plus (+) 1385 1980 34
AMVC81005C**
(Rise Range: 25° - 55°F)
Cooling
Speed Tap
Adjust
Tap
Low-Stage
CFM¹
High-Stage
CFM¹
Rise
(°F)
A
Minus (-) 1090 1555 55
Normal 1210 1725 49
Plus (+) 1330 1900 45
B
Minus (-) 1105 1575 54
Normal 1225 1750 49
Plus (+) 1350 1925 44
C
Minus (-) 1120 1600 53
Normal 1245 1775 48
Plus (+) 1370 1955 44
D
Minus (-) 1135 1620 53
Normal 1260 1800 47
Plus (+) 1385 1980 43
Notes
• These charts are for furnaces installed at 0’ - 4,500’. At higher alti-
tudes, a properly de-rated unit will have the same temperature rise
at a particular CFM, while the ESP at that CFM will be lower.
• The installation must be adjusted to obtain a temperature rise
within the range listed on the furnace nameplate.
• Do not operate above .5” w.c. ESP in heating mode.
• Propane gas installations will have a high-stage rise approximately
4°F lower than shown in the tables.
C
onTinouS
F
An
S
peeDS
Model
Furnace
Maximum CFM
Continuous
Fan Speed¹
,
²
AMVC80604B** 1760 440
AMVC80805C** 2000 500
AMVC81005C** 2000 500
¹ Continuous fan speed is 25% of furnace maximum CFM
² Three continuous fan speeds are possible with the CTK01AA thermo-
stat: 25%, 50%, and 75% of furnace maximum CFM
¹ @ .1” to .8” W.C. ESP