15
RS2310003 Rev. 0
Modules
This range features a choice of 4 different modules,
shown below. Grill, griddle, and rotisserie module must
be install on right side of range. Burner module may be
installed on either side. Information on how to purchase
modules can be obtained by calling your local authorized
dealer.
Two Burner Module
Grill Module
Griddle Module
Rotisserie Module
Installing Two Burner Module
WARNING
!
To avoid risk of personal injury, all controls must be in
off position before removing or installing modules.
1. Turn all control knobs to
OFF position.
2. While holding module with air shutter openings
towards rear, push module onto orifices.
• Module must cover orifices completely.
3. Place module into module reservoir.
• When module is installed correctly, it should not
slide.
Removing Two Burner Module
1. Turn all control knobs to
OFF position.
2. Locate tab on front of module.
3. Lift module up and slide out while holding
by front tab.
4. After module clears orifices, remove module
from range.