RS5320016 Rev. 0
A–16
Troubleshooting
WARNING
!
To avoid risk of electrical shock which can cause severe personal injury or death, do not remove outer case at
any time. Only authorized servicer should remove outer case.
Problem
Possible Cause
Oven does not operate.
Confirm oven is plugged into dedicated circuit.
Confirm oven is on grounded circuit.
(Contact electrician to confirm)
Check fuse or circuit breaker.
Oven operates intermittently.
Check air filter and discharge areas for obstructions.
If oven does not accept entries when pad is pressed.
Make sure oven is on and preheated.
Open and close oven door. Press pad again.
If oven malfunctions or shows “
ERR
”:
Oven control is equipped with a self-diagnostic system.
Self-diagnostic system alerts you if there is a error or
problem. When electronic control signals a problem,
follow steps listed below.
1.
Record number shown.
2.
Unplug oven, wait for 1 minute, and plug in oven.
• Disconnecting electrical supply may eliminate
service code. If failure continues, contact an
authorized servicer.
Oven fan turns on while oven is not preheating or
cooking.
Normal operation.
"PREHEAT NOT READY" displays when cook pad is
pressed.
Oven is operating normally. Display flashes
"PREHEAT NOT READY" if the preheat temperature
is different than programmed cooking cycle
temperature.
