8
A-
RS1300005 Rev. 0
What if my doors are not aligned?
•
Locate the higher door, and turn front adjustment screw
counterclockwise. Continue until doors are level.
•
If bottom of adjustment range is reached, and doors are
not level–raise opposite door by turning front adjustment
screw clockwise.
•
Replace toe grille
Turn both front adjustment
screws (A) clockwise to raise
and counterclockwise to
lower.
2
Remove toe grille and bottom hinge covers
(see previous instructions)
.
1
CAUTION
!
• To avoid damage to walls and flooring, protect soft vinyl or other flooring with cardboard, rugs, or other protective material.
• To avoid damage or breakage to adjusting bolt, do not use power tools to correct leveling.
•
DO NOT
adjust unit to be any shorter than 68 ½" inches tall (minus hinge and cap). Doing so may damage underside
components.
Turn both rear adjustment
screws (B) clockwise to raise
and counterclockwise to
lower.
3
Check with level to verify
1
/
4
" tilt to the
back for proper door closure.
•
If unit is aligned and stable, replace toe grille.
4
How to Level Your Refrigerator
Materials Needed
•
3
/
8
" hex head driver
• Level
What if my unit rocks?
•
Turn rear adjustment screw clockwise to raise rocking
corner.
•
Replace toe grille.
Installing Your Refrigerator
Confirm secure attachment by pulling on
tubing.
3
Turn on water supply and
correct any leaks.
•
Create service loop with remaining
tubing and attach to unit with "P"
clamp as illustrated. Avoid kinks.
4
How to Connect the Water Supply
continued
How to Adjust the Temperature Controls
This refrigerator is designed to operate at a household temperature of 55° to 110°F (13° to 43° C).
IMPORTANT:
Due to design of unit, always start temperature
adjustments with freezer section.
Allow 24 hours for temperatures to stabilize.
2
Check to see if freezer temperature is 0° to
2° F (-17° to -16° C).
3
•
Turn control to next highest number if too warm.
•
Turn control to next lowest number if too cold.
•
Allow 5 to 8 hours for adjustments to take effect.
Locate refrigerator and freezer controls on
upper left wall of fresh food section, and
set both controls to 4.
1
Check to see that fresh food section
is 38° to 40° F (3° to 4° C).
4
Repeat process, as necessary.
5
IMPORTANT:
Neither section will cool if freezer control is
set to
Off.
Materials needed
•
2 thermometers measuring -5° to 50°F (-21° to 10°C)
•
2 drinking glasses
How do I perform a temperature test?
•
Turn control to next highest number if too warm.
•
Turn control to next lowest number if too cold.
•
Allow 5 to 8 hours for adjustments to take effect.
For Freezer
•
Place thermometer in glass
of vegetable oil in middle
of freezer and continue
with step 3 of Temperature
Adjustment section.
For Refrigerator
•
Place thermometer in glass
of water in middle of unit
and continue with step 3
of Temperature Adjustment
section.
B
A
r
R
e
r
r
Summary of Contents for 22 Cu. Ft
Page 48: ...1 A RS1300005 Rev 0 Appendix A...
Page 72: ......
